Professional Vacuum Canister Hoses for Food Storage

Food vacuum canister hose

Our Food vacuum canister hose will connect your vacuum sealer to your canister to remove the air from the canister. There are 3 different types that food vacuum sealers Australia supply. The Status canister hose, the Preservac canister hose and Preservac canister hose with a cup end. Status canister hose is suitable for Status vacuum sealers and Status canisters and similar canisters. The Preservac canister hose is suitable for the Preservac vacuum sealers and any canisters that have a hole you push the end into. The Preservac canister hose with cup is suitable for the Preservac vacuum sealer and canisters that have a round valve that the cup suits over. All the hoses may be compatible with other brands, but please check first.

• The Preservac canister hose with cup is compatible with the Preservac vacuum sealers to connect with the Status, Tritan and Munro canisters.

Using the Food vacuum canister hose

Put the smaller end onto the vacuum port of your vacuum sealer machine. Then position it over the valve of the vacuum canister. When it builds up pressure the machine will automatically shut off meaning that it is at around 55 - 60 kpa, depending on the machine used. So that your food will stay fresher longer. This system will extend food storage up to 3 - 4 times of a normal container in the fridge or freezer. To release the pressure just move the valve sideways and release the side clamps. When cleaning your canisters, insure there are no particles' on the seal area or under the seal rubber.

Here is an article about freezing and storing with vacuum canisters. One way the food vacuum canister hose can be used. This system makes your vacuum sealer so much more than just a vacuum sealer.